Park Tool SPRE Park Reamer & Facer 1.5 inch

Information

• The Park Tool 758.2 will ream and face the head tubes of bikes that use the OnePointFive Interface Standard
• The 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and Reamer
• Must also be used with the 750 Centering Cone Adapter to ensure correct alignment
• 1.9516" (49.57mm) diameter reamer/2.441" (62mm) facer
• Bores a machined surface to a depth of approximately 25mm and then faces the end of the headtube
• SHIS terminology: The 758.2 is for EC49 upper and lower headtubes
• Use with generous quantities of Park CF-2 cutting fluid for best results and prolonged tool life